If none of these materials is available to you you can always elect slow drain to soak rags or towels in hot water and wrap them around the frozen pipe. This will probably take longer than any of the methods previously mentioned.
After you have checked these areas, take a close look around the refrigerator, both inside and outside. Is there any usual condensation that could indicate a water leak somewhere? Is the icemaker hose fastened securely to the water line repair line? Check also for any water spots on the floor, as these are typically clear signs of a water leak somewhere.
In general, plumbers out there can be subdivided into two: one who can do the basic maintenance plumbing duties and the other one who is capable of handling more complicated and general works. Let's discuss these two types.
The next step in this process is to determine what type of method is available for fixing the problem. You cannot just caulk a crack or fill it in with cement and hope for the best. Unfortunately, there is more work than this because you have to fix the problem from both the inside out and the outside in. This takes a professional in most cases to determine the best method for repair.
As with anything, when you are not sure how to fix a plumbing issue and when you don't have the proper equipment, you should contact a professional. They can usually find out what the problem is and resolve it for you in a short period of time. They will also be able to tell you if you have any other problems and water line repair they can suggest resolutions.
The way a toilet plunger works is by filling up with water and then pushing that water through the stopped up drain. When unclogging a clogged toilet, the idea is to plunge up and down a couple of times so the plunger fills with water and then jam the open end, sometimes called a force cone, into the waste outlet in the plugged toilet and start plunging. You may have to pump the plunger up and down several times to clear the blockage.
Then, you can take your new shower parts home and reinstall them in the inner assembly. It is very important that everything be aligned properly and tightened to prevent leaks. Beware of over tightening, however, since this can also cause problems. Once you are sure everything is installed properly, replace the cover plate and turn the water back on to test your repair work. With a little bit of work, your do-it-yourself shower repair project can be a success. It does not take an expert, just a little effort and know how.